WEBVTT

00:00:00.000 --> 00:00:01.488 align:middle line:90%
[MUSIC PLAYING]

00:00:01.488 --> 00:00:15.390 align:middle line:90%


00:00:15.390 --> 00:00:18.360 align:middle line:84%
One of the reasons that James
Webb Space Telescope will

00:00:18.360 --> 00:00:22.920 align:middle line:84%
usher in a new era of astronomy
is its unique set of mirrors.

00:00:22.920 --> 00:00:25.170 align:middle line:84%
To perform at their
very best, these mirrors

00:00:25.170 --> 00:00:27.600 align:middle line:84%
need to be shaped
with exact precision.

00:00:27.600 --> 00:00:30.040 align:middle line:84%
To find out just
how that gets done,

00:00:30.040 --> 00:00:34.470 align:middle line:84%
we're here at L3-IOS-Tinsley
in Richmond, California.

00:00:34.470 --> 00:00:36.270 align:middle line:90%
So, Ed, what's going on here?

00:00:36.270 --> 00:00:37.770 align:middle line:84%
Well, we're shaping
the mirror using

00:00:37.770 --> 00:00:39.600 align:middle line:84%
several different
processes to take it

00:00:39.600 --> 00:00:42.670 align:middle line:84%
down to about 20
nanometers of surface area,

00:00:42.670 --> 00:00:45.600 align:middle line:84%
which is about one fifth the
diameter of a human hair.

00:00:45.600 --> 00:00:47.520 align:middle line:84%
What else are you
trying to get rid of?

00:00:47.520 --> 00:00:49.110 align:middle line:84%
We have to remove
fine scratches down

00:00:49.110 --> 00:00:51.030 align:middle line:84%
to about eight
thousandths of an inch.

00:00:51.030 --> 00:00:52.680 align:middle line:84%
Anything wider than
that and it starts

00:00:52.680 --> 00:00:56.430 align:middle line:84%
to reflect light and diffuse it,
so you don't get a good image

00:00:56.430 --> 00:00:57.630 align:middle line:90%
off the telescope.

00:00:57.630 --> 00:00:59.700 align:middle line:84%
So we're removing the
grinding compound.

00:00:59.700 --> 00:01:01.945 align:middle line:84%
Actually, it's a rough
polish compound and beryllium

00:01:01.945 --> 00:01:03.820 align:middle line:84%
that's actually on the
surface of the mirror.

00:01:03.820 --> 00:01:07.050 align:middle line:84%
And we have to clean it before
we go on to the next process.

00:01:07.050 --> 00:01:10.180 align:middle line:84%
He's removing it off of
the part using a solvent.

00:01:10.180 --> 00:01:12.930 align:middle line:84%
The solvent he's using, is
it just Windex or much more--

00:01:12.930 --> 00:01:14.102 align:middle line:90%
No, we can't use Windex.

00:01:14.102 --> 00:01:15.810 align:middle line:84%
It has chemicals in
it that will actually

00:01:15.810 --> 00:01:17.580 align:middle line:84%
attack the surface
of the beryllium

00:01:17.580 --> 00:01:18.990 align:middle line:90%
and cause it to corrode.

00:01:18.990 --> 00:01:22.410 align:middle line:84%
So we have to use a
isopropyl alcohol in order

00:01:22.410 --> 00:01:24.920 align:middle line:90%
to clean the part and acetone.

00:01:24.920 --> 00:01:28.260 align:middle line:84%
Robert, Ed showed us the
cleaning of the mirrors.

00:01:28.260 --> 00:01:29.930 align:middle line:90%
So what's going on here.

00:01:29.930 --> 00:01:31.670 align:middle line:84%
After rough polishing,
we have to get rid

00:01:31.670 --> 00:01:34.070 align:middle line:84%
of the texture that's
left on the surface.

00:01:34.070 --> 00:01:36.710 align:middle line:84%
The smoothing process will
plane over that texture

00:01:36.710 --> 00:01:39.110 align:middle line:84%
and give us a true
mirror surface.

00:01:39.110 --> 00:01:40.850 align:middle line:90%
Could you do this by hand?

00:01:40.850 --> 00:01:43.430 align:middle line:84%
People used to do this by
hand, but you could not

00:01:43.430 --> 00:01:44.820 align:middle line:90%
make these mirrors.

00:01:44.820 --> 00:01:47.960 align:middle line:84%
It'd be very difficult to
not have residual texture

00:01:47.960 --> 00:01:49.580 align:middle line:90%
in these mirrors.

00:01:49.580 --> 00:01:50.900 align:middle line:90%
It looks like water.

00:01:50.900 --> 00:01:51.950 align:middle line:90%
Is it water?

00:01:51.950 --> 00:01:53.030 align:middle line:90%
No, it's not water.

00:01:53.030 --> 00:01:55.880 align:middle line:84%
It has a fine,
abrasive particle in it

00:01:55.880 --> 00:01:58.550 align:middle line:84%
and some other
chemistries that we

00:01:58.550 --> 00:02:01.220 align:middle line:90%
know work well with beryllium.

00:02:01.220 --> 00:02:03.950 align:middle line:84%
Beryllium is a very
difficult metal to polish.

00:02:03.950 --> 00:02:05.780 align:middle line:84%
So, Robert, it
kind of reminds me

00:02:05.780 --> 00:02:08.660 align:middle line:84%
of what women tried to
do-- exfoliate their skin,

00:02:08.660 --> 00:02:11.150 align:middle line:84%
trying to get rid of that
top layer of skin cells

00:02:11.150 --> 00:02:13.970 align:middle line:84%
to show a brighter
layer underneath.

00:02:13.970 --> 00:02:17.060 align:middle line:84%
Well, the mirror surface,
when it comes to this process,

00:02:17.060 --> 00:02:18.980 align:middle line:90%
has a texturing on it.

00:02:18.980 --> 00:02:21.980 align:middle line:84%
And so this process will
take the little peaks,

00:02:21.980 --> 00:02:24.440 align:middle line:84%
saw it off, saw it off
until, finally, you

00:02:24.440 --> 00:02:26.090 align:middle line:90%
have this perfect plane.

00:02:26.090 --> 00:02:29.630 align:middle line:84%
And these are not flat mirrors,
but you want that surface

00:02:29.630 --> 00:02:31.340 align:middle line:90%
to be just very continuous.

00:02:31.340 --> 00:02:34.670 align:middle line:84%
If it has roughness in
it, it won't perform well.

00:02:34.670 --> 00:02:37.280 align:middle line:84%
Because each little lump
and bump on the surface

00:02:37.280 --> 00:02:39.480 align:middle line:84%
then reflects light in
a different direction.

00:02:39.480 --> 00:02:42.050 align:middle line:84%
And so it doesn't come
back to the detectors.

00:02:42.050 --> 00:02:45.440 align:middle line:84%
So this process helps it
to be extremely uniform

00:02:45.440 --> 00:02:48.620 align:middle line:84%
so you have the maximum amount
of surface area returning

00:02:48.620 --> 00:02:49.995 align:middle line:90%
the light for you.

00:02:49.995 --> 00:02:51.620 align:middle line:84%
Well, thanks a lot
for showing us this.

00:02:51.620 --> 00:02:52.430 align:middle line:90%
Thank you.

00:02:52.430 --> 00:02:54.770 align:middle line:84%
So these processes the
mirrors go through,

00:02:54.770 --> 00:02:57.110 align:middle line:84%
like the rough polishing
and the smoothing,

00:02:57.110 --> 00:02:59.780 align:middle line:84%
are done over and
over again to make

00:02:59.780 --> 00:03:02.510 align:middle line:84%
sure the mirrors on the
James Webb Space Telescope

00:03:02.510 --> 00:03:05.570 align:middle line:84%
have a smooth surface
and the correct shape.

00:03:05.570 --> 00:03:07.910 align:middle line:84%
Thanks for joining us
for another edition

00:03:07.910 --> 00:03:09.290 align:middle line:90%
of Behind the Web.

00:03:09.290 --> 00:03:11.440 align:middle line:90%
[MUSIC PLAYING]

00:03:11.440 --> 00:03:17.000 align:middle line:90%